3D printing workshop in Thun
We rebuild your part.
No file needed. Bring the part in or send photos.
Reply within 24 hours · Berntorgasse 2, Thun
What it costs
Every offer is made of these items. You know the price before we start.
- Part check at the workshop0.–
- Measuring and drawing, per hour90.–
- Test print15.–
- Printing, by weight and timefrom 10.–
Prices in CHF.
How it works
You pay for the time measuring and drawing, and for the print. You know the price before we start.
From above
From the side
With a ruler next to it
Bring it in or send photos
The part itself, even broken, or photos with a ruler next to it.
Measure and draw
Measured with a caliper, redrawn on the computer. We make weak spots thicker.
You pay for the time, as offered
Try the test part
A quick test print shows whether it fits. If not, we correct the drawing.
A test print where it must fit exactly
Print the finished part
As many as you need, in PLA or PETG. You collect it at the workshop.
Printing by weight and time
Prices
- Part check at the workshop0.–
- Measuring and drawing, per hour90.–
- Test print15.–
- Printing, by weight and timefrom 10.–
Prices in CHF.
The workshop
Berntorgasse 2
3600 Thun
Not a shop with opening hours: you book a time, then someone is there and takes time for your part.
- Printers
- Bambu Lab P1S and X1 Carbon
- Largest parts
- 25 × 25 × 25 cm in one piece
- Layer height
- 0.2 mm
- Material
- PLA and PETG
What we don't do
- Weapons and weapon partsWe don't print them.
- Hotter than about 70 °C, petrol, big forcesWe look at it together first. Not everything works in 3D printing.
- Copies of protected parts for resaleA replacement for your own device is usually fine.
- Larger than 25 cm in one pieceWhere possible we split it into pieces to put together.
Yes, that's exactly what we're here for. Bring the part or send photos with a ruler next to it. Even a broken part helps. If you already have a file (STL, 3MF, STEP), send it along.
The time to measure and draw, and the print itself. A simple bracket is drawn faster than a gear with exact sizes. Before we start, you get an offer with a fixed price.
It depends on the part. The offer says when the test print and the finished part are ready.
PLA for stiff parts indoors (up to about 55 °C) and PETG for parts that need to be tougher, live outdoors or get warm (up to about 70 °C, per the maker's datasheet). We tell you what suits your part.
That's what the test print is for: you try it on, and we adjust the drawing before the finished part is printed.
You confirm that you may have the part copied. A replacement for your own device is usually fine; we don't copy protected parts for resale. We don't print weapons or weapon parts.